KYMCO DINK 200i Service Manual page 67

2
. EXHAUST MUFFLER/FRAME COVERS
Disconnect the rear combination light
connector.
Installation is in the reverse order of removal.
REAR COMBINATION LIGHT UNDER
COVER
Remove body cover (see page 2-10).
Remove the two bolts and rear combination
light under cover.
Installation is in the reverse order of removal.
FLOORBOARD
Remove the body cover (see page 2-10).
Remove the front lower cover (see page 2-
10).
Remove the two screws.
2-11
Rear Combination Light Connector
DINK 200i/125