KYMCO DINK 200i Service Manual page 374

18
. IGNITION SYSTEM
IGNITION COIL
REMOVAL/INSTALLATION
Remove the luggage box (refer to the
"FRAME COVERS
REMOVAL/INSTALLATION" section in
the chapter 2).
Disconnect the spark plug cap from the spark
plug (1).
DINK 200i:
Disconnect the ignition coil primary
connector (2).
Remove the two bolts (3) and the ignition coil
(4).
Installation is in the reverse order of removal.
DINK 125:
Disconnect the ignition coil primary
connectors (2).
Remove the bolt (3) and the ignition coil (4).
Installation is in the reverse order of removal.
18-7
DINK 200i
DINK 125
DINK 200i/125