KYMCO DINK 200i Service Manual page 66

2
. EXHAUST MUFFLER/FRAME COVERS
DINK 200i/125
FRONT LOWER COVER
Remove the front cover (see page 2-8).
Remove the foot skirt (see page 2-9).
Remove the six screws and front lower cover.
Installation is in the reverse order of removal.
REAR FENDER
Remove the two bolts and two nuts, then
remove the rear fender.
Installation is in the reverse order of removal.
BODY COVER
Remove the center cover (see page 2-5).
Remove the right and left foot skirts (see
page 2-9).
Remove the rear fender (see page 2-10).
Remove the rear spoiler and rear spoiler stay
(see page 2-5).
Remove the two screws, then remove the
body cover.
2-10