Coolant Replacement - KYMCO DINK 200i Service Manual

12
. COOLING SYSTEM

COOLANT REPLACEMENT

PREPARATION
The effectiveness of coolant decreases
with the accumulation of rest or if there
is a change in the mixing proportion
during usage. Therefore, for best
performance change the coolant
regularly as specified in he maintenance
schedule.
Mix only distilled, low mineral water
with the antifreeze.
Recommended mixture:
1:1 (Distilled water and antifreeze)
REPLACEMENT/AIR BLEEDING
Remove the front cover (refer to the
"FRAME COVERS
REMOVAL/INSTALLATION" section
in the chapter 2).
• •
When filling the system or reserve tank
with coolant (checking the coolant
level), place the scooter in a vertical
position on a flat, level surface.
Remove the radiator cap (1).
Remove the drain bolt (2) and drain the
coolant from the system.
12-5
DINK 200i/125