13
. DINK 125: FUEL SYSTEM/CARBURETOR/
FUEL TANK
REMOVAL/INSTALLATION
When removing the fuel tank, do not
allow flames or sparks near the working
area and drain the residual gasoline into a
container.
Remove the inner cover (refer to the
"FRAME COVERS
REMOVAL/INSTALLATION" section in
the chapter 2).
Disconnect the fill cap ground wire
connector (1).
Disconnect the fill cap lock cable (2).
Disconnect the fuel hose (3).
Disconnect the fuel unit connector (4).
Remove the four nuts (5) and remove the
bridge plate (6).
13-25
FUEL PUMP/ FUEL TANK
DINK 2000i/125