KYMCO DINK 200i Service Manual page 263

14. DINK 200i:
SIGNAL DATA CONTENTS
Page01:
Air Temp. (°C)
Air Temp. sensor volt (V)
Engine Temp. (°C)
Engine Temp. sensor volt (V)
Atm. Press. (kPa)
Page 02
Engine speed (rpm)
Throttle Position (%)
Standard:
Close fully: 0%
Open fully: 100%
TPS sensor volt for primary (V)
Standard:
Close fully: 0.68±0.05V
Open fully: 4.1±0.1V
TPIIdleMean (V)
Standard: 0.68±0.05V
TPIWotMean (V)
Standard: 4.1±0.05V
14-21
FUEL SYSTEM (Auto Control Fuel Injection System)