KYMCO DINK 200i Service Manual page 260

14. DINK 200 i:
5. Perform the diagnostics program, wait a
moment then select "OK".
6. Select "SET".
7. Select "Language", then to select language
(English).
7. Select the "Find ECU", then the ECU will
be find automatically.
8. Select the "DTC mark" to enter DTC
inspect menu.
9. Select "Load DTC" to appear Active
failure codes in DTC List.
Read "All DTC", "Active", "Occurred" or
"history" by select option block.
10. Select a DTC item in the "DTC LIST" to
appear the repair suggestion.
FUEL SYSTEM (Auto Control Fuel Injection System)
"OK" "Language"
"SET"
"Find ECU"
"DTC mark"
"Load DTC"
"DTC LIST" Repair suggestion
"English"
Option block
14-18