Table of Contents
Advertisement
20. LIGHTS/METERS/SWITCHES
DINK 200i/125
Cover
FRONT TURN SIGNAL LIGHT
Remove the two screws, then remove the
front turn signal light cover.
Push and turn the bulb counterclockwise to
remove it, then replace with a new one..
Installation is in the reverse order of removal.
Bulb
TAILLIGHT/BRAKE LIGHT/REAR
TURN SIGNAL LIGHT
Remove the four screws, then remove the
light cover.
20-4
- Quick Links:
- Specification (Dink 200I)
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
