Fastener Removal And Reinstallation - KYMCO DINK 200i Service Manual

2
. EXHAUST MUFFLER/FRAME COVERS
FASTENER REMOVAL AND
REINSTALLATION
REMOVAL
Depress the head of fastener center piece {.
Pull out the fastener.
INSTALLATION
Let the center piece stick out toward the head
so that the pawls | close.
Insert the fastener into the installation hole.
• •
To prevent the pawl | from damage,
insert the fastener all the way into the
installation hole
Push in the head of center piece until it
becomes flush with the fastener outside face.
2-3
DINK 200i/125