KYMCO DINK 200i Service Manual page 161

8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
Remove the spring.
Remove the spring collar on the movable
driven face.
Remove the three guide pins/rollers, then
remove the movable driven face.
Remove the needle bearing from driven face.
Remove the snap ring, then remove the
bearing from driven face.
Needle Bearing
Snap Ring
Bearing
Driven Face
8-17
Guide Pins/Rollers
Movable Driven Face
Dust Seal
O-ring
Dust Seal
Spring
DINK 200i/125
Spring Collar