KYMCO DINK 200i Service Manual page 388

20. LIGHTS/METERS/SWITCHES
Rear turn signal light
Remove the screw and then remove the bulb
cover.
Push and turn the bulb counterclockwise to
remove it, then replace with a new one.
Installation is in the reverse order of removal.
Taillight/Brake light
Push and turn the bulb counterclockwise to
remove it, then replace with a new one..
Installation is in the reverse order of removal.
LICENSE LIGHT
Remove the bulb socket (1).
Remove the bulb (2) and replace with a new
one.
Installation is in the reverse order of removal.
20-5
Bulb Cover
Bulb
DINK 200i/125
Bulb