Fastener Removal And Reinstallation - KYMCO G-DINK 300i Service Manual

2
. EXHAUST MUFFLER/FRAME COVERS
FASTENER REMOVAL AND
REINSTALLATION
REMOVAL
Depress the head of fastener center piece ←.
Pull out the fastener.
INSTALLATION
Let the center piece stick out toward the head
so that the pawls ↑ close.
Insert the fastener into the installation hole.
＊
To prevent the pawl ↑ from damage,
insert the fastener all the way into the
installation hole
Push in the head of center piece until it
becomes flush with the fastener outside face.
G-DINK 300i
2-2