Carburetor Removal; Auto Bystarter - KYMCO PEOPLE 125 Manual

5
. FUEL SYSTEM

CARBURETOR REMOVAL

Remove the frame body cover. ( 2)
Disconnect the auto bystarter wire connector.
Loosen the drain screw and drain the fuel
from the float chamber.
Disconnect the fuel tube and vacuum tube at
the carburetor.
Loosen the throttle cable adjusting nut and
lock nut, and disconnect the throttle cable
from the carburetor.
Loosen the carburetor intake manifold band
and air cleaner connecting tube band screws
and then remove the carburetor.

AUTO BYSTARTER

OPERATION INSPECTION
Measure the resistance between the auto
bystarter wire terminals.
Resistance: 5 W
minimum after stopping the engine)
If the reading is not within the limit, replace
the auto bystarter with a new one.
www.PlanDeGraissage.org
max. (10 minutes
Auto Bystarter Wire
Vacuum Tube
Lock Nut
Air Cleaner Connecting
Intake Manifold
Tube Band
Band
PEOPL E 125/150
Fuel Tube
Adjusting Nut
Throttle Cable
5-4