Cylinder Head Cover - KYMCO Downtown 125i 2009 Service Manual

Cortesia de/ Courtesy of: www.batmotos.com
6
. CYLINDER HEAD/VALVES

CYLINDER HEAD COVER

REMOVAL
Remove four bolts then remove the cylinder
head cover.
INSTALLATION
Install a new cylinder head cover O-ring and
install the cylinder head cover.
＊
Be sure to install the O-ring into the
groove properly.
Install and tighten the cylinder head cover
bolts to the specified torque in a crisscross
pattern.
Torque: 0.8~0.9kgf-m
Cortesia de/ Courtesy of: www.batmotos.com
DOWNTOWN 125i
6-4