Table of Contents
Advertisement
4
Setup and function
The device is designed for decentralised surface-mounted and flush-mounted installation.
■
The device can be linked with an available actuator via KNX group addresses.
■
The device (with bus coupler) can be assigned to an available switch actuator.
■
The integrated bus coupler makes possible the connection to the KNX bus line.
■
The device can, for example, send switching, dimming or blind control commands to KNX
■
actuators. The device can also be used for storing and sending of light scenes.
Depending on the model, the device has an internal temperature sensor / CO
■
moisture meter for measuring the values in the room. The measured value is made
available to the KNX bus via communication object.
The device must be parameterized for the use of the functions.
■
Depending on the model, the sensors are integrated in the device.
■
Product manual 2CKA001473B9679
Setup and function
sensor /
2
│24
Advertisement
Table of Contents
