Table of Contents
Advertisement
11.5
Application "CO2 sensor"
11.5.1
CO2 sensor — CO2 sensor
Options:
The parameter activates the CO
displayed in ETS.
11.5.2
CO2 sensor - Height of mounting location above normal height zero
Options:
The parameter is used to make an adaptation of the CO2 measurement to the height of the
installation location.
11.5.3
CO2 sensor — Measured value correction
Options:
The measured CO
displayed on the device and sent to the KNX bus.
Product manual 2CKA001473B9679
Description of application and parameters
Inactive
Active
sensor. The corresponding communicaiton objects are
2
Input option between 1000 m - +10,000 m
500 ppm
450 ppm
400 ppm
350 ppm
300 ppm
250 ppm
200 ppm
150 ppm
100 ppm
50 ppm
0 ppm
-50 ppm
-100 ppm
-150 ppm
-200 ppm
-250 ppm
-300 ppm
-350 ppm
-400 ppm
-450 ppm
-500 ppm
value can be corrected using the parameter. The corrected value is
2
Application "CO2 sensor"
│151
Advertisement
Table of Contents
