Table of Contents
Advertisement
11.1.2.2
Alarm function
Options:
Options:
Deactivated:
■
–
Communication object "LED: Alarm" is not enabled.
Activated:
■
–
Communication object "LED: Alarm" is enabled.
The LED will flash if an ON telegram is received on the 1-bit communication object "Alarm". If
the object receives an OFF telegram, the LED will no longer flash.
The LED always flashes in the same colour and brightness that was specified via parameter
"LED brightness during alarm" and "LED colour during alarm".
The alarm function could be used to display a wind alarm to the user, for example, so that the
user knows that no blind operation is possible at that time. An additional application would be
the signalling of an open door when the user would like to lower a roller shutter.
Notice
If the LED is currently serving as an orientation light, it will not blink. This also
applies if during the flashing it is switched to orientation illumination, the LED
then stops flashing immediately.
Product manual 2CKA001473B9679
Description of application and parameters
Deactivated
Activated
Yellow
Orange
Red
Violet
Blue
Green
White
Application "Device settings"
│70
Advertisement
Table of Contents
