Step Controller - Switch Command Above Threshold 1; Step Controller - Priority Above Threshold 1; Step Controller - Percent Above Threshold 1; Step Controller - Value Above Threshold 1 (Byte) - ABB ClimaECO SBS/Ux.0.1 Series Product Manual

11.6.22 Step controller — Switch command above threshold 1
Options:
The parameter defines which state should be sent after threshold value 1 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Switching command".
11.6.23 Step controller — Priority above threshold 1
Options:
The parameter defines which state should be sent after threshold value 1 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Priority".
11.6.24 Step controller — Percent above threshold 1
Options:
The parameter defines which state should be sent after threshold value 1 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Percent".
11.6.25 Step controller — Value above threshold 1 (byte)
Options:
The parameter defines which state should be sent after threshold value 1 is exceeded.
Product manual 2CKA001473B9679
Description of application and parameters
Off
On
End priority
OFF with priority
ON with priority
0 ... 100 %
0 ... 255
"Relative humidity" application
│188