Table of Contents
Advertisement
11.5.41 Behaviour at setting the blockage
Options:
If the sensor is blocked after the receipt of an ON telegram, the following parameters can be
selected:
Do not send:
■
–
The sensor sends no value during blockage.
Send current value:
■
–
The sensor sends its current value during blockage also when it has not changed.
Notice
The parameter is available only when parameter "Blocking object" is set on
"Active".
11.5.42 Settings — Value for blockage
Options:
Fixes the status for activating the blockage.
Notice
The parameter is available only when parameter "Blocking object" is set on
"Active".
11.5.43 PI controller - Blocking object
Options:
The complete function of the CO2 sensor can be blocked using this parameter and with a 1 via
the corresponding communication object. Deactivation takes place by setting a value of 0.
Notice
The parameter is available only when parameter "CO2 controller type" is set on
"PI".
Product manual 2CKA001473B9679
Description of application and parameters
Send nothing
Send value
0...64
Inactive
Active
Application "CO2 sensor"
│170
Advertisement
Table of Contents
