Table of Contents
Advertisement
11.1.4.6
CO
2
Options:
Internal measurement
■
–
CO
value is measured on the device.
2
Communication object
■
–
CO
value is fed via the bus.
2
The parameter can be used to select whether the CO
or fed to the device via a communication object via the bus.
Notice
–
–
–
11.1.4.7
Communication object data type
Options:
2-byte value (DPT 9.007)
■
–
For EIS 5 (9.007), when the display of the value for relative humidity takes place via the
communication object.
1-byte value (DPT 5.001)
■
–
For DPT scaling (5.001), when the display of the value for relative humidity takes place
via the communication object.
Notice
The parameter can only be set when parameter "Display relative humidity" is set
on "Yes". In addition, parameter "Relative humidity value above" must be set on
"Communication object".
Product manual 2CKA001473B9679
Description of application and parameters
value via
Internal measurement
Communication object
The parameter is only adjustable if the "Display CO
on "Yes".
With devices without CO
automatically to the device via a communication object.
The above selection is cancelled.
2 byte value (DPT 9.007)
1 byte value (DPT 5.001)
Application "Device settings"
value is measured directly on the device
2
module it is specified that the CO
2
value" parameter is set
2
value is sent
2
│76
Advertisement
Table of Contents
