Table of Contents
Advertisement
11.6.13 Relative humidity controller — Send control value at change of byte
Notice
The parameter is available only when parameter "Control value output format" is
set on "Byte".
Options:
The control value is sent after a defined value change. If this is not desired, the parameter must
be accordingly set to "inactive".
Product manual 2CKA001473B9679
Description of application and parameters
Inactive
In case of a change of 1
In case of a change of 2
In case of a change of 5
In case of a change of 10
In case of a change of 15
In case of a change of 20
In case of a change of 25
In case of a change of 30
In case of a change of 35
In case of a change of 40
In case of a change of 45
In case of a change of 50
"Relative humidity" application
│182
Advertisement
Table of Contents
