12.1.87 RH - Threshold 1
Name
RH: Threshold 1
The value sent via the object is parameterized in the application. This parameterized value is
sent to the KNX bus after the threshold is exceeded.
12.1.88 RH - Threshold 2
Name
RH: Threshold 2
The value sent via the object is parameterized in the application. This parameterized value is
sent to the KNX bus after the threshold is exceeded.
12.1.89 RH - Threshold 3
Name
RH: Threshold 3
The value sent via the object is parameterized in the application. This parameterized value is
sent to the KNX bus after the threshold is exceeded.
12.1.90 RH - Relative humidity setpoint
Name
RH: Relative humidity setpoint
Another basic set value can be specified for the device via the object.
Once a new value has been received, this acts as the new reference point and therefore has a
direct impact on the measuring results of the device.
12.1.91 RH - Block output
Name
RH: Block output
When the value "1" is received, all the KNX communication of the humidity sensor is blocked
and is no longer part of KNX bus communication.
Unblocking happens when the value "0" is received.
Product manual 2CKA001473B9679
Object function
Output
Object function
Output
Object function
Output
Object function
Output
Object function
Input
Communication objects
Communication objects
Data type
1.001 Switching
Data type
1.001 Switching
Data type
1.001 Switching
Data type
9.* 2-byte floating point value
Data type
1.001 Switching
│361