Table of Contents
Advertisement
11.6.64 Dew point alarm — Switch command at the end of the dew point alarm
Options:
If the dew point alarm is no longer present at the object, this parameter can be used to define
which status should be sent.
11.6.65 Dew point alarm — Priority for dew point alarm
Options:
The parameter defines which state should be sent in case of a dew point alarm.
11.6.66 Dew point alarm — Priority at the end of the dew point alarm
Options:
If the dew point alarm is no longer present at the object, this parameter can be used to define
which status should be sent.
11.6.67 Dew point alarm — Percent for dew point alarm
Options:
This parameter defines which value between 0 and 100% is sent in case of a dew point alarm.
11.6.68 Dew point alarm — Percent at the end of the dew point alarm
Options:
If the dew point alarm is no longer present at the object, this parameter can be used to define
which value between 0 and 100% should be sent.
11.6.69 Dew point alarm — Value for dew point alarm (0 - 255)
Options:
This parameter defines which value between 0 and 255 is sent in case of a dew point alarm.
11.6.70 Dew point alarm — Value at the end of the dew point alarm (0 - 255)
Options:
Product manual 2CKA001473B9679
Description of application and parameters
Off
On
End priority
OFF with priority
ON with priority
End priority
OFF with priority
ON with priority
0-100%
0-100%
0-255
0-255
"Relative humidity" application
│205
Advertisement
Table of Contents
