11.1.1.5
Use object for switchover time
Options:
No:
■
–
The communication object is not enabled.
Yes:
■
–
The communication object is enabled.
A 2-byte communication object "EF: automatic switchover time" can be enabled with this
parameter. The time can then be adjusted via the KNX bus.
Notice
This parameter can only be adjusted when the "Use of automatic
enable/blockage" parameter is set on "Automatic enable" or "Automatic
blockage".
Product manual 2CKA001473B9679
Description of application and parameters
No
Yes
Application "Device settings"
│65