Table of Contents
Advertisement
11.7.7.5
Value for position down (%)
Options:
The parameter is used to set the position to which a linked blind is to be lowered. The
associated 1-byte communication object "Sx: position" must hereby be connected with a 1-byte
position object of the blind actuator.
Percentage values can be set in steps of 1%. Meaning of the percentage values:
0% = blind completely raised.
■
100% = blind completely lowered.
■
Note
The parameter can only be set if the "Blind/roller blind switchover function"
parameter is set on "Blind" and the "Object type" parameter is set on "1-byte 0-
100%.
11.7.7.6
Value for position up (%)
Options:
The parameter is used to set the position to which a linked blind is to be raised. The associated
1-byte communication object "Sx: position" must hereby be connected with a 1-byte position
object of the blind actuator.
Percentage values can be set in steps of 1%. Meaning of the percentage values:
0% = blind completely raised.
■
100% = blind completely lowered.
■
Note
The parameter can only be set if the "Blind/roller blind switchover function"
parameter is set on "Blind" and the "Object type" parameter is set on "1-byte 0-
100%.
Product manual 2CKA001473B9679
Description of application and parameters
Setting option from 0 to 100 (%)
Setting option from 0 to 100 (%)
Application "Function block x"
│229
Advertisement
Table of Contents
