Table of Contents
Advertisement
12.1.35 RTC - Fan speed level status (heating)
Name
RTC: Fan speed level status
(heating)
The RTC receives the currently set fan speed level of the fan coil actuator via the 8-bit
communication object.
If a fain coil regulator is set for both operating modes of heating and cooling and an own
generating device is set for both operating modes, this communication object then operates
jointly with fan coil regulator heating.
12.1.36 RTC - Fan speed level 1 - 5 (heating)
Name
RTC: Fan speed level x
The controller sends a switching signal to the bus via the 1-bit communication object. When fan
speed level x is activated, value "1" is sent. Value "0" is sent when the fan speed level (1 - 5) is
deactivated.
If a fain coil regulator is set for both operating modes of heating and cooling and an own
generating device is set for both operating modes, this communication object then operates
jointly with fan coil regulator heating.
12.1.37 RTC - Basic setpoint
Name
RTC: Basic setpoint
This 2-byte communication object can be used to change the parameterised basic setpoint
value of the RTC. The parameter "Basic setpoint" is used to specify the set value the device
accesses. The following can be selected:
"Setpoint for heating comfort"
■
"Setpoint for cooling comfort"
■
"Mean value between heating comfort and cooling comfort"
■
12.1.38 RTC - Resetting manual setpoints
Name
RTC: Resetting manual setpoints
This 1-bit communication object is used to reset the manual setpoint adjustment that was set on
the device.
Product manual 2CKA001473B9679
Object function
Input
Object function
Output
Object function
Input
Object function
Input
Communication objects
Communication objects
Data type
5.001 Percent
(0..100%)
6.010 Counter value
Data type
1.001 Switching
Data type
9.001 Temperature value
Data type
1.001 Switching
│346
Advertisement
Table of Contents
