Table of Contents
Advertisement
11.6.15 Relative humidity controller - Hysteresis (symetrical)
Options:
The basic set value has a hysteresis. If the parameterised hysteresis value is
exceeded/undershot, the corresponding value is sent.
Notice
The parameter is available only when parameter "CO2 controller type" is set on
"Single stage", "Two-stage", "Three-stage" or "PI".
Product manual 2CKA001473B9679
Description of application and parameters
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
"Relative humidity" application
│184
Advertisement
Table of Contents
