Setpoint Settings - Set-Point Temperature For Frost Protection (°C); Setpoint Settings - Setpoint Temperature For Cooling Comfort (°C) - ABB ClimaECO SBS/Ux.0.1 Series Product Manual

11.4.7 Setpoint settings — Set-point temperature for frost protection (°C)
Options:
Function for protecting the building against the cold. On devices with a display, this mode is
indicated by the frost protection icon. Manual operation is blocked.
Note
This parameter is only available when the "Control function" parameter is set on
"Heating", "Heating with additional stage", "Heating and cooling" or "Heating and
cooling with additional stages".
11.4.8 Setpoint settings — Setpoint temperature for cooling comfort (°C)
Options:
Specifies the comfort temperature for cooling when people are present.
Note
This parameter is only available when the "Control function" parameter is set on
"Cooling" or "Cooling with additional stage".
Product manual 2CKA001473B9679
Description of application and parameters
Setting option between 5 - 15
Setting option between 10 - 40
Application "RTC"
│122