Rtc - Setpoint Display; Rtc - Request Setpoint (Master) - ABB ClimaECO SBS/Ux.0.1 Series Product Manual

12.1.45 RTC - Setpoint display

Name
RTC: Set value display (master)
RTC: Set-point display (slave)
The actual value for showing in the display is sent or received via the 2-byte communication
object. Depending on the parameter setting, this is an absolute temperature value or a
differential value (e.g. - 5 K - + 5 K).
Notice
When the master/slave operation is activated, the object "RTC: Setpoint display
(master)" of the master device for synchronisation must be connected with
object "RTC: Setpoint display (slave)" of the slave device.

12.1.46 RTC - Request setpoint (master)

Name
RTC: Request set value (master)
RTC: Request set value (slave)
The communication object is used to transmit the setpoint request of the button operation of a
slave device to the master device. The format can be an absolute or relative temperature value
or a counter value which is multiplied with an adjustable step size (standard value 0.5 K). The
confirmation is made via object "Confirm setpoint".
Notice
When the master/slave operation is activated, the object "RTC: Request setpoint
(master)" of the master device for synchronisation must be connected with
object "RTC: Request setpoint (slave)" of the slave device.
Product manual 2CKA001473B9679
Object function
Output
Input
Object function
Input
Output
Communication objects
Communication objects
Data type
9.001 Temperature value
9.002 Differential temperature value
9.001 Temperature value
9.002 Differential temperature value
Data type
9.001 Temperature value
9.002 Differential temperature value
6.010 Counter value
9.001 Temperature value
9.002 Differential temperature value
6.010 Counter value
│349