Table of Contents
Advertisement
11.7.6.3
Working mode of the buttons
Options:
1st button Up / 2nd button Down:
■
–
When the first button is pressed the "Up" command is sent and the "Down" command
when the second button is pressed.
1st button Down / 2nd button Up:
■
–
When the first button is pressed the "Down" command is sent and the "Up" command
when the second button is pressed.
The parameter is used to specify whether the first or second button triggers the "Up" or "Down"
movement command.
11.7.6.4
Value for position down (%)
Options:
The parameter is used to set the position to which a linked blind is to be lowered. The
associated 1-byte communication object "Sx: position" must hereby be connected with a 1-byte
position object of the blind actuator.
Percentage values can be set in steps of 1%. Meaning of the percentage values:
0% = blind completely raised.
■
100% = blind completely lowered.
■
Note
The parameter is only adjustable if the "object type" parameter is set to "1 byte 0
- 100%".
11.7.6.5
Value for position up (%)
Options:
The parameter is used to set the position to which a linked blind is to be raised. The associated
1-byte communication object "Sx: position" must hereby be connected with a 1-byte position
object of the blind actuator.
Percentage values can be set in steps of 1%. Meaning of the percentage values:
0% = blind completely raised.
■
100% = blind completely lowered.
■
Note
The parameter is only adjustable if the "object type" parameter is set to "1 byte 0
- 100%".
Product manual 2CKA001473B9679
Description of application and parameters
1st button Up / 2nd button Down
1st button Down / 2nd button Up
Setting option from 0 to 100 (%)
Setting option from 0 to 100 (%)
Application "Function block x"
│224
Advertisement
Table of Contents
