Table of Contents
Advertisement
11.7.5
Application - 1-button dimming
The application makes it possible to dim and switch a light via a button.
The following communication objects are available:
"Sx: switching"
■
"Sx: relative dimming"
■
The button has a switching object and a dimming object. A distinction is made between a short
press of the button (switching) and a long press (dimming).
In each case, the application makes a separate set of parameters and communication objects
available in function block x for both buttons.
Note
The parameters for application "1-button dimming" can be called up via general
parameters.
Note
The number (S1 - Sx) of the object depends on the function block and the button
number.
11.7.5.1
Duration of long operation
Options:
The application can differentiate between a short and a long press of the button. With a short
press of the button, the next level forward is switched to. With a long press of the button, the
first level is activated. Thus with a long press of the button a jump back from every level to the
first level is possible, without having to run through the remaining levels.
The parameter is used to specify the time from which a long press of the button is recognised
and the object values are reset. A typical value for a long press of the button is 0.4 seconds.
Product manual 2CKA001473B9679
Description of application and parameters
Setting option from 00.300 to 03.000 (ss.fff)
Application "Function block x"
│220
Advertisement
Table of Contents
