Table of Contents
Advertisement
11.7.9.3
Reaction on falling edge
Options:
No reaction:
■
–
No telegram is sent when the button is released.
Value 1:
■
–
Value 1 is sent when the button is released (at falling edge).
Value 2:
■
–
Value 2 is sent when the button is released (at falling edge).
Alternating value 1/value 2:
■
–
Value 1 and value 2 are sent alternately when the button is released.
Application "1-button value transmitter" can differentiate between the press and the releasing of
a button. A press is defined as "Rising edge" and the releasing as "Falling edge". Only one
communication object is available for both edges.
The parameter is used to specify whether a telegram with value 1 or value 2 is sent on the bus
at a falling edge via communication object "Sx: switching". A further option can be specified as
to whether the telegrams are sent alternately. This means that after value 1 has been sent,
value 2 is sent at a renewed release of the button. After it is released again, value 1 is again
sent out.
Note
Parameter "Value 1" and "Value 2" is used to specify the values that are to be
sent.
Product manual 2CKA001473B9679
Description of application and parameters
No reaction
Value 1
Value 2
Alternating value1/value2
Application "Function block x"
│238
Advertisement
Table of Contents
