Table of Contents
Advertisement
11.5.28 Settings — Value for output format switching command
Options:
The parameter defines whether a value should be sent after the threshold value is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Switching command".
11.5.29 Settings — Value for output format priority
Options:
The parameter defines which state should be sent after the threshold value is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Priority".
11.5.30 Settings — Value for output format switching command
Options:
The parameter defines which value should be sent after the threshold value is undershot.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Percent".
Product manual 2CKA001473B9679
Description of application and parameters
Off
On
End priority
OFF with priority
ON with priority
0-100
Application "CO2 sensor"
│165
Advertisement
Table of Contents
