Table of Contents
Advertisement
11.1.4.8
Display relative humidity
Options:
No
■
–
No display of relative humidity.
Yes
■
–
Display of relative humidity.
The parameter is used to select whether the relative humidity is shown on the display.
Notice
With devices without humidity module the relative humidity value is sent
automatically to the device via a communication object.
11.1.4.9
Relative humidity value above
Options:
Internal measurement
■
–
The relative humidity value is measured on the device.
Communication object
■
–
The relative humidity value is fed via the bus.
The parameter can be used to select whether the relative humidity value is measured directly
on the device or fed to the device via a communication object via the bus.
Notice
–
–
–
11.1.4.10
Show date
Options:
Product manual 2CKA001473B9679
Description of application and parameters
No
Yes
Internal measurement
Communication object
The parameter can only be set when parameter "Display relative humidity" is
set on "Yes".
With devices without humidity module it is automatically specified that the
relative humidity value is sent to the device via a communication object.
The above selection is cancelled.
No
Yes
Application "Device settings"
│77
Advertisement
Table of Contents
