Co2 - Co2 Threshold 3; Settings - Value For Output Format Switching Command - ABB ClimaECO SBS/Ux.0.1 Series Product Manual

11.5.33 CO2 — CO2 threshold 3
Options:
The parameterised value of threshold 3 from which a reaction should be triggered, e.g., "Fan
speed level 3", is added to threshold 1 (basic value) and threshold 2.
Notice
The parameter is available only when parameter "CO2 controller type" is set on
"Three-stage".
11.5.34 Settings — Value for output format switching command
Options:
The parameter defines whether a value should be sent after the threshold value is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Switching command".
Product manual 2CKA001473B9679
Description of application and parameters
Same as threshold 2
Threshold 2+50 ppm
Threshold 2+100 ppm
Threshold 2+150 ppm
Threshold 2+200 ppm
Threshold 2+250 ppm
Threshold 2+300 ppm
Threshold 2+350 ppm
Threshold 2+400 ppm
Threshold 2+450 ppm
Threshold 2+500 ppm
Threshold 2+550 ppm
Threshold 2+600 ppm
Threshold 2+650 ppm
Threshold 2+700 ppm
Threshold 2+750 ppm
Threshold 2+800 ppm
Threshold 2+850 ppm
Threshold 2+900 ppm
Threshold 2+950 ppm
Threshold 2+1000 ppm
Off
On
Application "CO2 sensor"
│167