Table of Contents
Advertisement
11.6.7
Relative humidity - Component
Options:
The share of the weighting of and external measured value integrated through a KNX
communication object is defined using this parameter.
Notice
The parameter is available only when parameter "External measured value" is
set on "Active".
11.6.8
Relative humidity controller - Controller type
Options:
The control type for actuating the external fan is defined using this parameter.
11.6.9
Relative humidity — Permit change of the basic set value via bus
Options:
The basic set value defined for the first threshold can be optimised via the KNX bus, e.g.,
through a visualisation.
Product manual 2CKA001473B9679
Description of application and parameters
Include in calculation at 10%
Include in calculation at 20%
Include in calculation at 30%
Include in calculation at 40%
Include in calculation at 50%
Include in calculation at 60%
Include in calculation at 70%
Include in calculation at 80%
Include in calculation at 90%
Only use external measured value
Inactive
Single-stage
Two-stage
Three-stage
PI
No
Yes
"Relative humidity" application
│179
Advertisement
Table of Contents
