Table of Contents
Advertisement
12.1.70 RTC - Fan speed level x (cooling)
Name
RTC: Fan speed level x (cooling)
These, up to five communication objects send the current fan speed level of the second fan coil
actuator (cooling) via 1-bit switching commands to the actuator.
If a fain coil regulator is set for both operating modes of heating and cooling and an own
generating device is set for both operating modes, this communication object then operates
jointly with fan coil regulator cooling.
12.1.71 RTC - Current HVAC operating mode
Name
RTC: Current HVAC operating
mode
The RTC uses this communication object to send the operating mode that belongs to the
currently set setpoint temperature.
RTC operating mode
Error
Comfort override operating mode
Standby override operating mode
Economy: Override operating mode
Building protection override operating mode
Condensate water alarm
Dew point alarm
Window open
Control OFF
Presence
Comfort
Standby
Economy
Building protection
Table 8: Operating mode
Product manual 2CKA001473B9679
Object function
Output
Object function
Output
Current HVAC operating mode
Building protection
Comfort
Standby
Economy
Building protection
Building protection
Building protection
Building protection
Building protection
Comfort
Comfort
Standby
Economy
Building protection
Communication objects
Communication objects
Data type
1.001 Switching
Data type
20.102 HVAC mode
│357
Advertisement
Table of Contents
