Table of Contents
Advertisement
11.7.10.5
Value 1/value 2 for falling edge
The possible options and setting limits depend on parameter "Object type".
Options for selection "1 bit":
Options:
Options for selection "1 byte 0-100%":
Options:
Options for selection "1 byte 0-255":
Options:
Options for selection "2-byte float":
Options:
Options for selection "2-byte signed":
Options:
Options for selection "2-byte unsigned":
Options:
Options for selection "4-byte float":
Options:
Options for selection "4-byte signed":
Options:
Options for selection "4-byte unsigned":
Options:
The parameter is used to set value 1 or value 2 that is sent at a falling edge.
Note
Parameter "Value 1 for falling edge" can only be set if the "Reaction at falling
edge" parameter is set on either "Value 1" or "Alternating Value1/Value2".
Parameter "Value 2 for falling edge" can only be set if the "Reaction at falling
edge" parameter is set on either "Value 2" or "Alternating Value1/Value2".
Product manual 2CKA001473B9679
Description of application and parameters
Off
One
Setting option from 0 to 100 (%)
Setting option from 0 to 255
Setting option from -671088.64 to 670760.96
Setting option from -32768 to +32767
Setting option from 0 to 65535
Setting option from -4000000 to 4000000
Setting option from -2147483648 to 2147483647
Setting option from 0 to 4294967295
Application "Function block x"
│245
Advertisement
Table of Contents
