Mounting; Flush-Mounted Installation; Removal Protection (Optional) - ABB ClimaECO SBS/Ux.0.1 Series Product Manual

6.5

Mounting

6.5.1

Flush-mounted installation

6.5.1.1

Removal protection (optional)

Notice
–
–
Carry out the following step for the optimum installation of the removal protection:
Fig. 17: Installation of the removal protection
Product manual 2CKA001473B9679
After mounting with removal protection, dismantling, see chapter
"Dismantling with the removal protection tool" on page 42, is then only
possible with the removal tool!
The removal protection is not a component part of the device and is to be
ordered separately.
1
Connection, installation / mounting
Option
1. Installing the removal protection [1].
– Push the removal protection into
position by hand.
│38