Co2 Controller - Co2 Controller Type; Co2 Controller - Permit Change Of The Basic Set Value Via Bus; Co2 Controller - Control Value Output Format - ABB ClimaECO SBS/Ux.0.1 Series Product Manual

11.5.9 CO2 controller — CO2 controller type
Options:
The control type for actuating the external fan is defined using this parameter.
11.5.10 CO2 controller — Permit change of the basic set value via bus
Options:
The basic set value defined for the first threshold can be optimised via the KNX bus, e.g.,
through a visualisation.
11.5.11 CO2 controller — Control value output format
Options:
The output value when the respective threshold is exceeded or undershot is defined using this
parameter.
Notice
The parameter is available only when parameter "CO2 controller type" is set on
"Single stage", "Two-stage" or "Three-stage".
Notice
For selection of parameter setting "PI" only the selection between "Percent" or
"Byte" is available.
Product manual 2CKA001473B9679
Description of application and parameters
Inactive
Single-stage
Two-stage
Three-stage
PI
No
Yes
Switch command
Priority
Percent
Byte
Scene
Application "CO2 sensor"
│155