Led Colour During Alarm; During Operation Function - Application - ABB ClimaECO SBS/Ux.0.1 Series Product Manual

11.1.2.4

LED colour during alarm

Options:
Yellow - white:
■
– The LED lights up in the specified colour during the alarm.
The parameter is used to specify the colour the LED lights up in during an alarm
Notice
This parameter can only be set if the "Alarm function" parameter is set on
"activated".
11.1.3

During operation function - Application

Options:
Inactive:
■
– Application is not active.
Object during operation:
■
– Application is active.
The application makes monitoring of the device possible. A 1-bit telegram for further evaluation
is made cyclically available to the KNX bus via communication object "HB: in operation". This,
for example, allows monitoring of the device on a visualization. When the device is removed, it
does not send a cyclic telegram and a fault message appears on the visualization.
The following communication object is available:
"HB: In operation"
■
Notice
The following parameters can only be adjusted when the function "Function
during operation" is set on "Object during operation".
The parameters for application "Function during operation" can be called up via
general parameters.
Product manual 2CKA001473B9679
Description of application and parameters
Yellow
Orange
Red
Violet
Blue
Green
White
Inactive
Object during operation
Application "Device settings"
│72