11.6.40 Step controller — Value above threshold 3 (byte)
Options:
The parameter defines which state should be sent after threshold value 3 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Byte".
Notice
The parameter is available only when parameter "Controller type" is set on
"Three-stage".
11.6.41 Step controller - Value at measurement value failure (byte)
Options:
If the internal or external measurement malfunctions or fails, a defined value can be sent
through this parameter.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Byte".
11.6.42 Step controller — Value above threshold 3 (scene)
Options:
The parameter defines which state should be sent after threshold value 3 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Scene".
Notice
The parameter is available only when parameter "Controller type" is set on
"Three-stage".
Product manual 2CKA001473B9679
Description of application and parameters
0 ... 255
0-255
0 ... 64
"Relative humidity" application
│197