Cyclic Telegrams - Enable; Priority - Switching Input; Priority - Input Priority; Priority - Output - ABB ClimaECO SBS/Ux.0.1 Series Product Manual

Notice
The communication objects regarding the channels (general functions) appear in
the same sequence depending on the parameterization.
–
–
–
12.1.122 Cyclic telegrams — Enable
Name
GFx: Enable
The function "Cyclic telegram" can be temporarily blocked or enabled via the 1-bit
communication object.

12.1.123 Priority - Switching input

Name
GFx: Switching input
The switching telegrams received via the 1-bit communication object are transmitted to object
"GFx: Output" depending on the
state of the "GFx: Priority input" object.

12.1.124 Priority - Input priority

Name
GFx: Input priority
The values 0, 1, 2 and 3 can be received via the 2-bit communication object. Each value
triggers a specific forced operation of object "GFx: Output".

12.1.125 Priority - Output

Name
GFx: Output
The telegrams received via communication object "GFx: Switching input" are transferred to
object "GFx: Output" depending on the state of the "GFx: Input priority" object.
Product manual 2CKA001473B9679
Only one sequence is explicitly presented in the following.
The individual channels are differentiated with channel numbering (e.g. GF1,
etc.).
The same applies to the numbering of the inputs.
Object function
Input
Object function
Input
Object function
Input
Object function
Output
Communication objects
Communication objects
Data type
1.001 Switching
Data type
1.001 Switching
Data type
2.001 Switching priority
Data type
1.001 Switching
│374