Table of Contents
Advertisement
11.6.12 Relative humidity controller — Send control value at change
Notice
The parameter is available only when parameter "Control value output format" is
set on "Percent".
Options:
The control value is sent after a defined percentage change. If this is not desired, the parameter
must be accordingly set to "inactive".
Product manual 2CKA001473B9679
Description of application and parameters
Inactive
In case of a change of 1%
In case of a change of 2%
In case of a change of 3%
In case of a change of 4%
In case of a change of 5%
In case of a change of 6%
In case of a change of 7%
In case of a change of 8%
In case of a change of 9%
In case of a change of 10%
In case of a change of 11%
In case of a change of 12%
In case of a change of 13%
In case of a change of 14%
In case of a change of 15%
In case of a change of 16%
In case of a change of 17%
In case of a change of 18%
In case of a change of 19%
In case of a change of 20%
In case of a change of 21%
In case of a change of 22%
In case of a change of 23%
In case of a change of 24%
In case of a change of 25%
"Relative humidity" application
│181
Advertisement
Table of Contents
