Table of Contents
Advertisement
11.1.1.8
LED colour in a blocked state
Options:
Yellow - white:
■
–
The LED lights up in the specified colour during blockage.
The parameter is used to specify the colour the LED lights up in when the device is blocked.
Note
The parameter is only adjustable if the "Brightness of LED during blockage"
parameter is set on "dark" or "bright".
11.1.2
LED - Additional function — Application
Options:
Inactive:
■
–
Application is not active.
LED additional function:
■
–
Application is active.
Notice
The following parameters can only be adjusted when the function "Device
enable" is set on "LED-additional function". The parameters for application "LED
additional function" can be called up via general parameters.
Product manual 2CKA001473B9679
Description of application and parameters
Yellow
Orange
Red
Violet
Blue
Green
White
Inactive
LED additional function
Application "Device settings"
│68
Advertisement
Table of Contents
