Step Controller - Switch Command Below Threshold 1; Step Controller - Priority Below Threshold 1; Step Controller - Percent Below Threshold 1 - ABB ClimaECO SBS/Ux.0.1 Series Product Manual

11.6.16 Step controller — Switch command below threshold 1
Options:
The parameter defines which state should be sent after threshold value 1 is undershot.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Switching command".
11.6.17 Step controller — Priority below threshold 1
Options:
The parameter defines which state should be sent after threshold value 1 is undershot.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Priority".
11.6.18 Step controller — Percent below threshold 1
Options:
The parameter defines which state should be sent after threshold value 1 is undershot.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Percent".
Product manual 2CKA001473B9679
Description of application and parameters
Off
On
End priority
OFF with priority
ON with priority
0 ... 100 %
"Relative humidity" application
│185