Table of Contents
Advertisement
11.1.3.1
Cycle time
Options:
The telegrams of the object during operation are sent cyclic on the bus.
The parameter specifies the time interval from which a new sending of the telegrams occurs.
11.1.3.2
Objects sends cyclic
Options:
Off telegram:
■
–
Object during operation sends an Off telegram.
ON telegram:
■
–
Object during operation sends an On telegram.
The parameter is used to specify whether an Off or an On telegram is sent cyclic on the KNX
bus via communication object "HB: In operation" during the parameterized time.
Display settings - General
11.1.4
11.1.4.1
Display actual temperature value
Options:
No
■
–
The actual temperature is not shown on the display
Yes
■
–
The actual temperature is shown on the display
The device shows the temperature value in the middle of the top line.
Product manual 2CKA001473B9679
Description of application and parameters
Setting option from 00:00:55 to 01:30:00 (hh:mm:ss)
Off telegram
On telegram
No
Yes
Application "Device settings"
│73
Advertisement
Table of Contents
