9.4.2
Adjust temperature
Notice
–
–
–
6
Fig. 32:
Setting the temperature
Product manual 2CKA001473B9679
The set-point temperature appears automatically on the display. The device
must be switched on for this to happen.
The following illustration shows an example of a configuration.
The function can be individually parameterized on one of the button pairs.
°C
°C
Au to
The setpoint temperature is adjusted with
the buttons [1] and [6].
The current setpoint temperature is
shown in the display.
1
–
Press button [1] to increase the
setpoint temperature.
–
Press button [6] to reduce the
setpoint temperature.
The new setpoint temperature is
displayed.
Operation
│58