Co2 Sensor - Co2 Error; Co2 Sensor - Send Co2 Value In Case Of Change - ABB ClimaECO SBS/Ux.0.1 Series Product Manual

11.5.4 CO2 sensor — CO2 error
Options:
If an error is detected on the sensor, it can be sent to the KNX.
11.5.5 CO2 sensor — Send CO2 value in case of change
Options:
The parameter is used to determined when a change should be actively sent to the KNX bus.
The telegram load can be reduced by the setting.
Product manual 2CKA001473B9679
Description of application and parameters
Message
Do not send message
Inactive
In case of a change of 10 ppm
In case of a change of 20 ppm
In case of a change of 50 ppm
In case of a change of 100 ppm
In case of a change of 150 ppm
In case of a change of 200 ppm
In case of a change of 250 ppm
In case of a change of 300 ppm
In case of a change of 350 ppm
In case of a change of 400 ppm
In case of a change of 450 ppm
In case of a change of 500 ppm
Application "CO2 sensor"
│152