Table of Contents
Advertisement
11.4.10 Setpoint adjustment — Maximum manual reduction during cooling mode (0 - 9°C)
Options:
This preset can be used to limit the manual decrease during cooling.
Note
This parameter is only available when the "Control function" parameter is set on
"Cooling," "Cooling with additional stage," "Heating and cooling" or "Heating and
cooling with additional stages".
11.4.1
Setpoint adjustment - Step size of manual setpoint adjustment
Options:
The default can be used to set the step size of the setpoint adjustment per press of the button
on the device. The default setting is 0.5 K.
Product manual 2CKA001473B9679
Description of application and parameters
Setting option between 0 - 9
0.1 K
0.2 K
0.5 K
1.0 K
Application "RTC"
│127
Advertisement
Table of Contents
